31 Oct 24:
Sanders du jour. We used 60 grit belts, they remove a lot of material fast and take some care to operate.
Inner stem repair sanded.
Inner stem repair. Screw hole to hold outer stem while epoxy dries, then later a larger hole will be drilled for a bow eye.
60 grit for the belt sanders.
We cut this teak piece to fit the inner stem face and ends of the original outer stem, then fastened it with TotalBoat THIXO Fast Cure and one screw. After the epoxy dries we will sand the new piece to shape.
All the holes are filled now, HENNING should float with minimal sinkage :)
Fall at the Boat yard.
Log of HENNING.
No comments:
Post a Comment