Sunday, April 12, 2015

Sunfish Work Dolly

I had been using some sawhorses to work on our Sunfish but spotted a "finishing dolly" in a Laser Performance photo that look pretty cool. I contacted Bo Williams at LP and he rounded up some photos and pics of a dolly that they use. It is approximately 8 feet long, 3 feet wide and 2 1/2 feet tall. The cool part is how the bunks articulate.

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -

I used the base of my dolly and made some bunks to copy what LP has.

From SBR 4: Jun 2014 -

Used some extra plywood to make the ends.

From SBR 4: Jun 2014 -

Added the bunk arms, used 3/4 inch galvanized hardware.

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -

Carpeted the bunks.

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -


Then I used on a 2003 Sunfish repair and it works great. It is easy to flip the boat and the bunks hold the boat secure while I move it around.

From SBR 4: Jun 2014 -

From SBR 4: Jun 2014 -

No comments:

Post a Comment