Trimmed the middle cleat to clear the centreplate case flange with a circular saw.
Cut the forward seat to width and beveled the edges to fit with a circular saw.
Trimmed the transom cap to fit with a belt sander, 60 grit and a random orbital sander.
Float test, small leak forward of the keel strip, appears to be coming from a stem strip screw hole.
Cut handles for the floorboards, centered them so the floorboard would be balanced when we have to carry them.
Marked a hole big enough for 4 fingers wearing a glove. Drilled pilot hole for the jigsaw blade.
Cut the hole with a jigsaw.
Made a pattern to send to a friend.
Log of VICTORY.
No comments:
Post a Comment