Saturday, June 22, 2013

1952-4 Wooden Sunfish "Zip" and 1977 Brother "Neptune"

14 Jun 2013:

We picked up a 1952-4 wooden Sunfish, reportedly one of the first 20 built by the Alcort partners and delivered to a friend. It sold from an estate in Waterbury and has been living a quiet life in the rafters of a garage in Grand Island NY for 7 years. A restoration was started but never completed, so boat is taken apart but most parts are accounted for. The current owner likes the restoration work we do and would like to give us the wooden boat, and sell us her 1977 sister Neptune. Here is the first picture we saw of the boat, which we decided to name "Zip"edeedoodah.

From Small Boat Restoration

Jeff gave Zip a bath before we showed up, so I don't get to take the "barn find" photo. She looks good on those saw Buffalos, which ended up coming home to Florida with us :)

From Small Boat Restoration

Loaded Zip up at the house and headed over to Niagara Sailing Club to pick up Neptune. A little duct tape will keep padding secure on spars and ratchets off the hull for the 1156 mile ride. The modified Magic Tilt trailer rode great on the way up, we'll see how it goes heading South through Erie, Cleveland, Columbus, Cincinatti, Louisville, Nashville, Birmingham, Montgomery and into Florida.

From Small Boat Restoration

Zip and Neptune take a break with the big rigs in Pennsylvania.

From Small Boat Restoration

Here is Zip's deck edge trim, made of mahogany. The Delaware, Lackawanna and Western Railroad lantern made the trip down from Grand Island, I saw it hanging in the garage in the first photo and Jeff threw it in with the deal.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

We bought this rudder pin 2 years ago and have been waiting for the boat to show up.

From Small Boat Restoration

Wilcox and Crittenden boom block for wooden boom.

From Small Boat Restoration

It fits!

From Small Boat Restoration

Mast collar and halyard cleat before.

From Small Boat Restoration

Mast collar and halyard cleat after. Used teak oil on wood and lemon juice/salt on the cleat.

From Small Boat Restoration

No bow handle so I used the bow strap , trailer frame and towel to fashion a hold down.

From Small Boat Restoration

Zip and Neptune arrive at Jack's Boat Yard. Merci is making fun of their Canadian accent, Phoenix is egging her on and Cyane is sleeping.

From Small Boat Restoration

I tied a line through daggerboard well to keep Zip from sliding aft.

From Small Boat Restoration

From Small Boat Restoration

Here is my "Bill Knot" named after a friend who ties some beauties.

From Small Boat Restoration

I had to secure wood spars to aluminum to keep them from flexing too much.

From Small Boat Restoration

Lacing sail using marlin hitch.

From Small Boat Restoration

Spar interlocking hardware.

From Small Boat Restoration

Old North Sail, made in Canada. And wooden spars made of Sitka Spruce!

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Double decked Neptune. The foam noodles worked great and she didn't move at all during 1156 mile ride home.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

1977 Sunfish

From Small Boat Restoration

Wooden floorboards.

From Small Boat Restoration

Tried some paint stripper, we didn't like the residue and staining, so we switched to sanding.

From Small Boat Restoration

Rigged for racing.

From Small Boat Restoration

Sanding through red/primer/red/primer to fir plywood using random orbital sander an 80 grit sandpaper. 120 would have worked as well.

From Small Boat Restoration

From Small Boat Restoration

Ergonomic testing.

From Small Boat Restoration

Painted white so you can see if weeds hung up on rudder.

From Small Boat Restoration

Deck is nailed on.

From Small Boat Restoration

Old repair to rotted area, this will be cleaned up in a few weeks.

From Small Boat Restoration

Bits box.

From Small Boat Restoration

Neptune's sticker.

From Small Boat Restoration

From Small Boat Restoration

Neptune heading to new home.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Zip checking out the beach with Scout,

From Small Boat Restoration

Mahogany splashguard.

From Small Boat Restoration

Details on the mast.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Rudder on right.

From Small Boat Restoration

Temporary shelter for Zip.

From Small Boat Restoration

Sanding continues.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Screwdrivers were on sale at Sears, wanted new ones to remove splashguard backer.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Killed the sander, Ace was the place for helpful new sander.

From Small Boat Restoration

From Small Boat Restoration

The dry vac hooked up to the sander, kept dust down.

From Small Boat Restoration

Tiller bridle eyestraps.

From Small Boat Restoration

Splashguard backer screws needed to be cleaned out and removed.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Part of backer had to be coaxed loose.

From Small Boat Restoration

Deck hardware that came with the boat.

From Small Boat Restoration

A coffee can and bucket come in handy for keeping track of tools and hardware.

From Small Boat Restoration

One backer rail split, area will clean up nice.

From Small Boat Restoration

From Small Boat Restoration

A couple of hull screws came through the side.

From Small Boat Restoration

Decl will be lighty sanded and repainted red, full sanding this Winter.

From Small Boat Restoration

Painting the hull, see roll and tip video on youtube video bar.

From Small Boat Restoration

From Small Boat Restoration

Rolled some extra paint onto Merci...

From Small Boat Restoration

and the chocks.

From Small Boat Restoration

Zip's bilge.

From Small Boat Restoration

Deck edge sanding.

From Small Boat Restoration

Ready for vacuum and acetone wipe.

From Small Boat Restoration

From Small Boat Restoration

West System epoxy applied, 105 epoxy and 207 hardener.

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

From Small Boat Restoration

Floorboards, cockpit, deck edge and backer rail painted Interlux Brightside Fire Red.

From Small Boat Restoration

From Small Boat Restoration

Halyard and sheet.

From Small Boat Restoration

Mast collar reinstalled, checking gooseneck setting.

From Small Boat Restoration

Line whip for the halyard, a fun, easy project.

From Small Boat Restoration

Mast has a nice taper to it and a sheave at top. The bottom section is aluminum and had something that looked like old masking tape on it. For aesthetics I wrapped the bottom section in gaff tape, it will help protect mast step as well.

From Small Boat Restoration

From Small Boat Restoration

Set the gooseneck aka yoke at 24 inches, halyard will be at 60 from gaff outhaul. This setup is good for a nice, lazy sail.

From Small Boat Restoration

Not really sure that a gooseneck was prototypical for this year, as it had copper shims and there is a hole through the spar underneath. An early Sunfish at Lake Champlain Maritime Museum has a leather yoke, so some research is required. In the meantime I am padding this area gaff tape.

From Small Boat Restoration

From Small Boat Restoration

Sail went up real nice and the spars made a pleasing thunk against the mast when the breeze shifted.

From Small Boat Restoration

From Small Boat Restoration

Attaching bridle and bridle eyestraps, grabbed a philips head out of habit, older screws are slotted :)

From Small Boat Restoration

Installing rudder fittings, found a screw had been sheared off inside the transom, so I drilled the shanks out, starting with tiny bit and working up through the bit sizes until screw could be installed.

From Small Boat Restoration

The carriage bolt actually goes through the transom! I tried to line the fittings up like the not-so-old style rudder and the holes didn't line up, bolt was hitting transon. Took out boat and deck plate lined up perfect over a big ol hole in the deck I had been ignoreing.

From Small Boat Restoration

Keel plate and carriage bolt.

From Small Boat Restoration

Rudder is rigged. The groove in the keel plate is very deep, the rudder will not pop up and will have to be installed just before launch. No running up on the beach with this setup. We love the keeper chain for the rudder pin.

From Small Boat Restoration

From Small Boat Restoration

Mahogany splashrail backer and steam bent splashrail installed.

From Small Boat Restoration

Painting the deck edge trim.

From Small Boat Restoration

Zip is back in the water for a test sail, she sailed beautifully. She didn't want to gybe but gave a smooth, solid sail. Had a small leak It stopped so maybe boat swelled up a bit, we will check that out before next sail, maybe wet the boat inside and see if water drips out. Our wet vac is handy to get water out afterwards. And the 3 loop bridle almost caused a capsize, we are going to deep six that bridle.

From Small Boat Restoration

From Small Boat Restoration

I don't know who was more excited, Zip or the Skipper.

From Small Boat Restoration

Zip's fan club, we even made t-shirts :)

From Small Boat Restoration

Boat measurer swung by...

From Small Boat Restoration

The fir plywood is fabulous!

From Small Boat Restoration

From Small Boat Restoration

Zip sails, Summer Sailstice 2013.

From Small Boat Restoration

Summer 2014: Zip takes a dip.

From SBR 4: Jun 2014 -

18 May 16:
1953 Alcort SunfishZip's bottom never got the full strip and paint, so we are going to spruce it up for the Bagdad Riverfest. Paint swatch test, we are going to use Rustoleum Topside marine paint Bright Red, which is the color on the right bow and a small stripe over the Interlux Brightside Fire Red. The oil base of the paint will help condition the wood.


Belt sander with a light touch, 40 grit then 120. The shop vac with a HEPA filter hooks up to the belt sander, plus I wore a mask, goggles, hat, gloves and a long sleeve shirt...and pants. Putty knife to scrape out seam compound and clear a groove for Pettit Flexpoxy.


Found a nice scarf on the port side bottom.


21 May 16:
We got an invite to bring some boats to the first Bagdad FL Riverfest. The park was built on the site of an old sawmill and has great access for canoes and kayaks. Our 1953 Sunfish Zip and 1950s Sailfish Winnie got to attend this year.

Road trip!






to be continued...

6 comments:

  1. Well done! You have saved Zip for the ages!

    ReplyDelete
  2. I stumbled into you page here and was very impressed with your story about Zip, And the love and care you put into the restoration. I just bought a wooden sailfish ( it does not have the little area for your feet) at auction, it just looked so in need, just like Zip, i could not resist. I have no boating experience. But I have fun fixing things up but i'm not sure i'm qualified to do it, especially if the boat is a very rare item , I would not want to mess up it's historical value. However you have left a very detailed trail to follow about how to do it, impressive. Could you give me an idea of the value of the boat, before, after and how much you put into the cost of restoration. I also saw a vid on youtube of someone sailing it and with the background music it makes you want to get it done and sail it. :)

    ReplyDelete
  3. Value before or after, no idea, it would depend on the buyer's Wants and Needs. Zip was a pretty complete boat when we got her, missing a keel strip and the sail had a few small tears. She was used and cared for, the previous owners began a restoration but moved on to other things. We wanted to get her sealed up and messing about again, that is where her spirit is. As for cost there was sandpaper (50), epoxy (75), brushes(50), rollers (50), interlocking hardware (150), paint (35), line (50) and a new sail (375). Plus some screws and a new sander. And about 60 hours of labor.

    ReplyDelete
  4. Very cool boat - love the woodies! Is it possible to "backdate" a fiberglass sunfish with a mahogany splashguard? What about wooden spars?

    ReplyDelete