Sunday, October 9, 2016

Barbashela Log 09 Oct 16

09 Oct 16:

Worked on the mid sections of the rail cap. Put a 1 x 6 inch plank on boat to get scribe the outer curve. Remember to leave enough plank to get 3 1/4 inch flat. Removed plank and cut to shape with 4 1/2 inch circular saw set to minimum depth. Clamped plank to boat and belt sanded (80 grit) outer curve flush with outer gunwale. Removed plank and scribed 3 1/4 inch flat on plank to mark the inner curve. Cut inner curve. Cut lap. Attached plank to boat dry and belt sanded inner and outer fair curves.

Cypress pile is getting smaller.

Click here for Barbashela's full story.

No comments:

Post a Comment