Started taking the lines off of the Sunfish, used Alcort Super Sailfish plans as a guide to figure out what measurements we need. Today we measured the length, deck width and found the Stations (frames) in inches. Most measurements are 1/16th, but there are a few 1/32.
Stations in inches, with Station 0 at the bow. The offsets will be in Feet-Inches-Eighths.
Also measured the width of the deck every 5 inches from the bow out to 20, then every 10 inches to develop Half Breadths. Gathered measurements on stringers, cleats and keel and deck beam (upper and lower longeron).
Log of CHIP.
No comments:
Post a Comment