23 May 19:
Came across some note in Capn Jack's memo book, a rough draft of his Standard Operating Procedures (SOP) for trailer sailing his 1971 O'Day Day Sailer II CYANE. We are transcribing them here for posterity and further development. If you have comments, please add them below and we'll incorporate them into future checklists.
Unedited v1.0
Boat Trailer
1. Trailer coupled to car and pad locked
2. Safety chains connected
3. Tipper mechanism locked in place
4. Boat tie down straps in place and taunt
5. Trailer wheels greased
6. Tail lights connected
7. Boat winch safety strap connected to boat
8. Dolly wheel cranked up
9. Safety rope for boat to trailer
Boat Gear
1. Anchor and rode - S
2. Life jackets - S
3. Seat cushions - S
4. VDS Visual Distress Signals - S
5. Weather radio - S Cell phone
6. Compass
7. Fist Aid Kit - +
8. Hats with spares - +
9. Water and snacks - +
10. (Tools and parts) box
11. Paddles (two) - S
12. Sails, boom + rudder tiller
13. Drain plugs
14. Bow and dock lines
15. Knives, bailer, frnder
16. Sunglasses and sunscreen
17. Deck shoes
18. Battery and case, motor
19. Flags
Car
1. Grease gun and lug wrench
2. Spare tire, lug nuts
3. Chocks to block wheel on car when launching
Launching and Retrieving Boat
1. Untie mast and slide back in crutch
2. Bend jib to mast
3. Ensure side stays are connected and free to move
4. Insure halyard is in mast
5. Slide mast to tabernacle
6. Raise mast while keeping watch on shrouds as to tangling. Connect mast to tabernacle
7. Connect jib forestay to boat bow
8. Connect boom to mast
9. Bend sails to mast and boom. Remove boom crutch
10. Tie main down haul and out haul
11. Install and tie rudder and tiller
12. Install motor and battery
13. Connect bow line
14. Remove boat to trailor
15. tie down strap
16. Remove trailor lights
17. Back trailor down ramp and set brakes. Put trans in park, block wheel and turn engine off
18. Disconnect wench strap from boat bow to trailor
19. Tip trailer (use "T" handle) if needed
20. Slide boat off trailer
21. Start car and put in drive. Remove chock while depressing brake and unlock same
Reverse SOPs to retrieve boat.
"Coffee Time"
S - Safety
+ - Health
Jack was an Environmental Safety and Health professional, so we are guessing that his annotations of the S and the + sign that looked like the first aid cross were to denote Safety and Health gear. Part of his job at at the chemical plant was to develop SOPs, so it naturally carried over to his messing about.
We couldn't help but laugh at a few of the steps, like Boat Gear #8. Hat's with spares...."oops, there goes my hat!" and Launching and Retrieving #4. Insure halyard is in mast....that must have been a fun day :)
Let us know what your notes would be!
Cheers
Clark and Skipper and Capn Jack
Showing posts with label o'day. Show all posts
Showing posts with label o'day. Show all posts
Thursday, May 23, 2019
Thursday, May 16, 2019
Cape Cod Shipbuilder Company Day Sailer I+
16 May 19:
The Day Sailer has been built by several different companies since 1958, starting with the O'Day Company out of Fall River Massachusetts. There have been 3 different models, with the current builder Cape Cod Shipbuilding Company building a modified version of the DS I.
Designed by Uffa Fox, the Day Sailer is a nice boat for cruising and racing. The current DS I, which I'll call the DS I+ has the following features:
-Hand-layed fiberglass hull and deck with high gloss gelcoat
-Waterat centerboard with bronze handle
-Lindsey rudder blade with aluminum rudder head and varnished ash tiller
-Stainless steel 1/8" forestay and shrouds with "T" ball fittings and turnbuckles
-2 sealed airtanks,1 cuddy airtank w/new style hatch
-3-1 mainsheet w/Harken swivel cam installed on centerboard trunk
-Dacron Sta-set Running rigging, Stainless Steel Standing Rigging
-Bow eye for trailering, stern eyes for docking
-Hull choices-red, blue, green or white gelcoat; deck = white
-Rubrail at shear
The Standard Day Sailer has a hinged mast, deck stepped w/ external halyards
The Race version comes with the following items:
-Zephyr aluminum mast, keel stepped with internal halyards led to the cuddy cabin
-Barberhaul
-Boom vang
-Cunningham
-Hiking strap
-Spinnaker gear
-Zephyr boom and internal outhaul, stainless steel and Harken fittings
-Adjustable traveler with Harken fittings. Skipper or crew can adjust from the rail
Wendy runs the show at Cape Cod, they can build a race ready DS I+ with keel stepped mast and hanked jib, or a cruiser friendly boat with mast tabernacle and furler jib. Give her a call and she'll get you set up.
Cape Cod Shipbuilding Company
The Day Sailer has been built by several different companies since 1958, starting with the O'Day Company out of Fall River Massachusetts. There have been 3 different models, with the current builder Cape Cod Shipbuilding Company building a modified version of the DS I.
Designed by Uffa Fox, the Day Sailer is a nice boat for cruising and racing. The current DS I, which I'll call the DS I+ has the following features:
-Hand-layed fiberglass hull and deck with high gloss gelcoat
-Waterat centerboard with bronze handle
-Lindsey rudder blade with aluminum rudder head and varnished ash tiller
-Stainless steel 1/8" forestay and shrouds with "T" ball fittings and turnbuckles
-2 sealed airtanks,1 cuddy airtank w/new style hatch
-3-1 mainsheet w/Harken swivel cam installed on centerboard trunk
-Dacron Sta-set Running rigging, Stainless Steel Standing Rigging
-Bow eye for trailering, stern eyes for docking
-Hull choices-red, blue, green or white gelcoat; deck = white
-Rubrail at shear
The Standard Day Sailer has a hinged mast, deck stepped w/ external halyards
The Race version comes with the following items:
-Zephyr aluminum mast, keel stepped with internal halyards led to the cuddy cabin
-Barberhaul
-Boom vang
-Cunningham
-Hiking strap
-Spinnaker gear
-Zephyr boom and internal outhaul, stainless steel and Harken fittings
-Adjustable traveler with Harken fittings. Skipper or crew can adjust from the rail
Wendy runs the show at Cape Cod, they can build a race ready DS I+ with keel stepped mast and hanked jib, or a cruiser friendly boat with mast tabernacle and furler jib. Give her a call and she'll get you set up.
Cape Cod Shipbuilding Company
Subscribe to:
Posts (Atom)


