29 Jun 19:
Our 1963 Alcort Sunfish CHIP is ready for Sea Trials, so she needed to get off the finishing dolly and onto a Dynamic Dolly. I asked Skipper how to organize Sunfish TETRIS and she said she wanted her 1965 Alcort Sunfish WAVE to take a turn on he finishing dolly, get her purtied up like the other boats, fix the amateur patches I put on 20+ years ago. So first we dollied WAVE up to the Carriage House and dropped her in the grass. Next we used Skipper's field expedient Sunfish hoist to get CHIP off of the finishing dolly.
Lowered CHIP onto the Dynamic Dolly and rolled her out next to WAVE.
WAVE loaned CHIP her spars on deck Sunbrella cover, a fine cover that we got fro SLO Sail and Canvas. It has nice straps!
Rolled the finishing dolly out into the yard and walked each end of WAVE up onto the dolly. Rolled dolly into the Carriage House. WAVE telling fish stories to ZIP and WINNIE.
While we were in the Carriage House we shaved some yaks. "Yak shaving" is what we call it when we find other jobs to do while avoiding the primary job, which in this case was getting CHIP out back to the Sunfish Shack and finishing cleaning some air vents inside the house. Today's yaks to shave were cutting some 1/8th inch nylon line to make daggerboard retaining lines for WAVE and PHOENIX and whipping the ends of a couple of vintage Sunfish/Sailfish sheets.
We cut the nylon line to length and seared the ends. Line is long enough so that daggerboard can easily be removed, but not much longer than that. The retaining line is there to keep the daggerboard from floating away after a capsize.
Tied the line with a bowline. Make the little loop, the run the rabbit (end of the line) up through the hole...
...around the tree (long end of the line) and back down into the hole.
Snug down the bowline. Cut another line for PHOENIX. Yak 1 shaved.
Old School. Simple.
Yak Shaving Take 2. Wrapped the end of the sheet with a piece of gaff tape and seared the end. Then whipped the end with waxed line. Yak 2 shaved.
How to whip a line.
Back to our original unscheduled program, CHIP taking up WAVE's slip in the Sunfish Shack, ready for Sea Trials!
Log of CHIP.
Log of WAVE.
Showing posts with label line whip. Show all posts
Showing posts with label line whip. Show all posts
Saturday, June 29, 2019
Tuesday, February 6, 2018
How To Whip the End of a Line
06 Feb 18:
When we cut a piece of rope to make a line, we finish the ends with a waxed whipping twine so it won't unravel. Materials used are gaff tape, waxed whipping line and New England Rope Vintage line. It's fun, we get to run with scissors and burn stuff. Tools needed are scissors and a lighter, and sometimes pliers to pull the twine if the wraps were too tight.
Our fancy rigging kit.
When we cut a piece of rope to make a line, we finish the ends with a waxed whipping twine so it won't unravel. Materials used are gaff tape, waxed whipping line and New England Rope Vintage line. It's fun, we get to run with scissors and burn stuff. Tools needed are scissors and a lighter, and sometimes pliers to pull the twine if the wraps were too tight.
Our fancy rigging kit.
Monday, May 6, 2013
Sunfish Pickin Perdido, FL
Found a 1982 Sunfish, decent condition, not being used by new owner.
Nice ride home behind the pickin van
North sail is a little faded but usable
Rudder is in good shape
Daggerboard is even better shape
A few simple projects, clean up the end of the sheet
Boom will be replaced, it has already been trimmed an inch and goosneck area has corrosion
Perdido boat got a bath and some light sanding and wax may be next
![]() |
| From Sunfish Sailboat Restoration |
Nice ride home behind the pickin van
![]() |
| From Sunfish Sailboat Restoration |
North sail is a little faded but usable
![]() |
| From Sunfish Sailboat Restoration |
Rudder is in good shape
![]() |
| From Sunfish Sailboat Restoration |
Daggerboard is even better shape
![]() |
| From Sunfish Sailboat Restoration |
A few simple projects, clean up the end of the sheet
![]() |
| From Sunfish Sailboat Restoration |
Boom will be replaced, it has already been trimmed an inch and goosneck area has corrosion
![]() |
| From Sunfish Sailboat Restoration |
![]() |
| From Sunfish Sailboat Restoration |
Perdido boat got a bath and some light sanding and wax may be next
![]() |
| From Sunfish Sailboat Restoration |
Subscribe to:
Posts (Atom)












