Paint sticks held backer patches in place while they dried.
Cut the strings and sticks loose.
6 layers of 6 oz fiberglass cloth to build up each area, close to the thickness of the hull.
Saturated the fiberglass cloth with Jamestown Distributors TotalBoat High Performance epoxy, stacked up the layers then skimmed the top with TotalBoat THIXO.
Test fit the cypress backer block for the bridle eyestrap.
Backer block was coated with epoxy then fastened to the inside of the hull with THIXO.
Log of Viper.
No comments:
Post a Comment