ZSA ZSA came off the rack today and we moved her onto the finishing dolly. We towed her around front to the carriage house
We continued removing the bottom. We used an old chisel to open the seam and pry the plywood loose. I pried up to keep the outer edge of the oak side as square as possible, the oak is pretty tough and is in good shape.
Someone added foam to the design. They also added extra framing. The foam is not closed cell or factory, so we are removing that. We also will remove the extra framing and use 1/4 inch ply for the new bottom. When we are done, the boat should weigh 20-25 pounds less and be back to factory specs.
Restoration Log of ZSA ZSA.
No comments:
Post a Comment