Trimmed the toe rail a bit to fit for the bow handle. The wooden Alcort bow handles have a tab that wraps the bow, and another strip attaches below and wraps the keel.
Keel strip wraps back about 16 inches.
Attached mast collar with #8 silicone bronze screws, drilled a pilot hole that matched the screw shank diameter and a countersink for the head of the screw. Attached the halyard cleat with the vintage Alcort bronze screws.
Drilled pilot holes and attached eyestraps with vintage Alcort bronze screws.
We like line bridles, the original boat would have had a 2 loop or 3 loop plastic coated wire bridle. 2 loop bridles are the standard today on new boats.
Attached the bow line and splashguard. Splashguard functions more as a handhold or foot rest.
Log of ZSA ZSA.
No comments:
Post a Comment