First coat of topside polyurethane, TotalBoat WetEdge, rolled and tipped.
Used the old rub strip to set the first cut on the table saw.
Cut new rub strip to thickness.
Cut a 45 degree scarf on the strip.
Fit first end of the rub strip.
Marked aft cut.
Used the Shinto rasp to trim the rub strip.
The Shinto rasp has fine teeth on one side and coarse teeth on the other.
Ready to attach.
Countersinks and pilot bits for wood screws.
Drilled holes for #8 silicone bronze wood screws.
New rub strip section.
Log of ZSA ZSA.
No comments:
Post a Comment